KJ 7000
01. Product Characteristics
- Used as a special copolymer resin
- Possible to construct large tiles with strong adhesion
- Excellent slip resistance
- Excellent durability and heat resistance
- Economic due to large construction area
02. Use of product
- Tiles are attached to the dry surface of apartments, villas, kitchens, bathrooms, etc.
- Tile reconstruction site requiring more perfection
- Gypsum board, concrete surface, PC, plywood surface, etc.
03. Precautions for use
- Keep construction at 5~25℃ indoors (especially, do not freeze)
- Not for use in outside, floor ceilings and public baths with large pools of water vapor.
- Prepare for contraction expansion by installing elastic joints
04. Construction METHOD
- Clean the construction surface after curing it sufficiently.
- After applying the cerabest, pay about 2m and finish the tile as soon as possible (within 20 minutes).
- Glue to the tile by pressing it.
- Beat lightly with a rubber mallet to apply the ceramic best evenly.
- Prevent flaws by putting new joints on the corners.
- The ceramic surface of the tile is cleaned before the flag, and shock and moisture are prohibited.
- Residues are sealed and stored indoors.
05. Packing unit
- 17 kg
06. Standard usage
Ground |
Gypsum board standard |
CAN area at the time (18.kg) |
About 3.5 pyeong |
Required amount per ㎡ (kg) |
1.7 kg |
Remark |
Smoothness of the base surface, thickness of the coating, Depending on the tile shape, etc. |